Washing your hair after microblading requires some modifications to your usual routine to avoid wetting your freshly tattooed brows. Direct water contact and hair product runoff in the initial days and weeks after your procedure can cause problems like premature brow fading, infection risks and uneven pigment retention.
While getting clean hair is still important for overall hygiene, avoiding brow contact with water, shampoo and conditioner is crucial for proper healing in that critical first week after microblading. This means washing hair last in the shower, angling your face away from the spray and taking extra care to ensure no product or water gets on your brows.
In this guide, we’ll cover techniques for safely washing and styling hair while keeping your microbladed eyebrows dry and protected during healing. We’ll discuss tips like washing hair last in the shower sequence, angling your face away from water, applying conditioner away from your hairline and gently patting your brows dry afterward.
By modifying your usual hair washing routine in these simple yet strategic ways, you’ll give your freshly microbladed brows the best opportunity to heal properly, bond the pigment and achieve optimal results.
So if you’re wondering “How to wash hair after microblading?” safely and effectively, follow the best practices covered here to keep your brows high and dry while still maintaining clean, fresh-looking tresses.
Let’s get started with the details on washing hair safely after microblading.
Tips For Washing Your Hair After Microblading
Here are some tips for washing your hair after microblading:
- Wash your hair last in your shower routine. This avoids soap/product runoff directly on brows during the majority of your bathing.
- Lean away from the shower head and angle your face up while rinsing conditioner or shampoo from your hair.
- Apply conditioner or any hair products to the middle and ends of your hair, keeping them away from your hairline and roots near your brows.
- While conditioner soaks, shampoo your roots and scalp while tilting your head down and leaning forward to avoid water spray reaching your brows.
- Rinse conditioner from your hair last, continuing to keep your face angled away from the water and leaning forward with head tilted down.
- Gently pat your brows absolutely dry with a soft tissue or towel after washing your hair. Avoid rubbing. Change the towel frequently.
- Use a blow dryer on the lowest warm setting to ensure your brows are completely dry after washing hair, if needed. Hold the dryer 6-12 inches away and avoid aiming it at your brows.
- Limit sweating as much as possible for at least a week after microblading to minimize moisture exposure for healing brows. Pat brows dry immediately if you do sweat.
By following these techniques for washing and drying your hair while avoiding direct water contact and minimizing moisture exposure, you’ll support optimal conditions for your microbladed brows to heal properly and achieve the best possible results. All without sacrificing clean, fresh-smelling strands.
How To Avoid Getting Your Eyebrows Wet While Washing Your Hair?
Here are some ways to avoid getting your eyebrows wet while washing your hair after microblading:
- Wash your hair last in the shower sequence. This ensures that any water or product runoff during hair washing does not get onto your brows earlier in your bathing routine.
- Lean your head forward and down while rinsing out conditioner or shampoo. The bent neck position angles your eyebrows up and away from the spray of water.
- Tilt your face toward the ceiling while rinsing off soap or body wash from the rest of your body. This points your brows in the opposite direction of the shower head.
- Apply conditioner or any hair products to the middle and ends of your hair only, avoiding your roots near your hairline. This keeps product from dripping onto your brows.
- While conditioner soaks in your hair, shampoo your roots and scalp while continuing to lean forward with your head tipped down. This directs water spray down your back and away from your eyebrows.
- Rinse conditioner and shampoo from your hair last, after washing and rinsing the rest of your body. Continue angling your face up and away from water.
- Gently pat your brows absolutely dry with a clean towel after showering. Replace the towel frequently to avoid moisture buildup.
- Use a blowdryer on its lowest warm setting to ensure that your brows are completely dry after washing hair, if needed. Avoid aiming the dryer directly at your brows.
By practicing these techniques, you can wash your hair thoroughly while minimizing the risks of water or product contact that could disrupt healing and cause problems for your freshly microbladed eyebrows.
What To Do If Your Eyebrows Get Wet After Washing Your Hair?
Here are the steps to take if your eyebrows get wet after washing your hair:
- Pat your brows absolutely dry immediately with a soft, clean towel or tissue. Gently blot – do not rub. Change the towel frequently to ensure they are completely dry.
- Avoid washing or scrubbing your brows, as this can worsen any pigment loss that may have occurred. Pat drying is sufficient.
- Do not apply heat like from a blow dryer, as this can damage healing skin and lift more pigment.
- Avoid applying any lotions, creams or other products to your brows for at least 24 hours after they get wet to give them time to dry out fully.
- Do not wear any makeup on your brows for at least 24 hours to allow the skin to breath and heal.
- Monitor your eyebrows closely over the next few days for any signs of excess fading, color loss, or irregularities in pigment.
- Some minor fading is normal immediately after brows get wet, especially in the first critical week after microblading. But large gaps or an uneven appearance may require a touch-up sooner.
- Consider scheduling a touch-up appointment 2-4 weeks earlier than normal if you notice significant fading or color loss from wet brows caused by washing your hair. This can restore shape and pigment without too long of a gap.
Even with the best precautions, accidents happen and your brows may get splashed while washing your hair. But by immediately patting them dry gently and avoiding excess scrubbing or heat, you can minimize potential pigment loss. Just monitor your brows closely over the coming days for signs of excess fading that would benefit from an earlier-than-planned touch-up appointment.
Things To Avoid After Microblading
Here are some things you should avoid after microblading:
- Getting your brows wet for at least 7-14 days. This includes showers, baths, swimming and heavy sweating. Moisture can lift pigment and disrupt healing.
- Applying any products to your brows for 2-4 weeks. This includes oils, creams, serums and makeup. Wait until brows are fully healed.
- Excessive sun exposure. Use sunscreen on your face but avoid getting sun directly on brows for at least 2 weeks. UV rays can darken pigment.
- Harsh facial treatments. Skip any extractions, peels or lasers focused on your brow area for at least 4 weeks after microblading.
- Vigorous exercise. Limit strenuous activity that causes heavy sweating for at least a week to minimize moisture exposure for healing brows.
- Picking or pulling at any dry skin. This can disturb healing skin and lift pigment before it fully bonds. Allow scabs and skin to shed naturally.
- Scrubbing or washing your brows. Gently pat dry only with a soft towel for the first 7-14 days. Avoid excessive rubbing.
- Popping any blisters that form. This can increase risk of infection. Blisters will heal and dry naturally over time.
- Touching or rubbing your brows unnecessarily. Less handling is best while pigment settles in during the first two weeks.
By avoiding these activities and irritants after microblading, you’ll give your eyebrows the best chance to heal properly, minimize pigment loss and achieve the most natural-looking results. With patience and proper aftercare, you’ll extend the longevity of your semi-permanent brows between needed touch-ups.
While washing your hair is still important after microblading, taking the proper precautions to avoid wetting or contacting your freshly tattooed eyebrows is essential for optimal healing and results. By modifying your usual routine to wash hair last, angling your face away from water and patting brows dry gently afterward, you’ll give your microbladed brows the best chance to heal properly and achieve longevity between needed touch-ups.
So if you’re wondering how to wash your hair safely after microblading, following the techniques covered in this guide will allow you to maintain clean, fresh-smelling strands while protecting your investment in your newly enhanced brows. With patience and diligence, you’ll soon be back to your regular hair washing routine with beautifully microbladed eyebrows.
FAQs
1. How long after microblading can I wash my hair normally?
Avoid getting brows wet for at least 7-14 days. Take precautions like washing hair last and angling away from water for 1-2 weeks and up to a month for best results.
2. Is conditioner ok on brows after microblading?
No, avoid all hair products on brows for at least 1-2 weeks. Gently pat brows dry immediately if conditioner gets on them.
3. What if I accidentally splash water on my eyebrows?
Gently pat them dry right away with a soft towel. Avoid washing or scrubbing. Monitor for signs of uneven fading that may require an earlier touch-up.
4. Can I use hairspray after microblading?
Yes, but avoid spraying directly onto brows. Wait at least a week and hold hairspray 6-12 inches away while spraying to reduce particle contact with brows.
5. How soon can I blow dry my hair?
Wait at least 1 week to blow dry hair after microblading. Avoid directing air flow at brows and use the lowest warm setting for minimal moisture.